Includes :
1x QS 1 Adhesive Remover (420ML)
1x QS 5 Stainless Steel (420MIL)
1x Qs 7 Spray Adhesive (420MIL)
Get the bundle now at only $15.70 ( up to $10 each)
QS 1 Adhesive Remover
Applications :
•Removal of adhesive residues, tar and labels.
•Able to clean up and flush away dirt, grease, oil, silicone, grime and most non-curing adhesive films, or similar substances.
•Can be used for surface preparation prior to the use of adhesives.
For Use On :
Concrete, brick, plastic parts, glass, plaster, stone, wood, metal and related surfaces.
Direction For Use :
1.Provide ventilation in workplace.
2.Clean and dry area before applications.
3.If required, mask area that shouldn’t be coated.
4.Shake CAN well before use.
5.Turn spray tip so arrow points to dot on rim. (DO NOT point spray tip to yourself or others)
6.Apply generous coating to the surface and wait for few minutes.
7.Remove adhesive residue with a scraper, squeegee or cloth.
8.Repeat process of 6 and 7 until the adhesive is fully remove.
Features & Benefits :
•Allow easy cleaning and removing of adhesives residue
•Rapid acting within few minutes
•Able to remove most of the adhesive tapes
•Works on a wide range of surfaces and materials
•No unpleasant fumes
•Convenient and excellent spray control
•Evaporates without leaving residues
•Free from silicone
Storage & Shelf Life
The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. DO NO store near oxidizing agents or combustible materials. In Countries where high heat and humidity are a factor, special pre-cautions must be taken. Store product in a covered, well ventilated warehouse and avoid excess heat conditions.
Precautions :
•KEEP AWAY from heat, sparks, open flame or other ignition sources.
•AVOID inhalation of spray mist or vapours.
•AVOID contact with eye and skin.
•DO NOT smoke while using product.
•DO NOT use product in confined space.
•DO NOT puncture/incinerate container.
•DO NOT store at temperatures ABOVE 120°F.
QS 5 Stainless Steel Polish & Cleaner
Application :
•A ready-to-use cleaner and polish packaged in an aerosol container.
•Cleans, polishes, brightens and protects stainless steel and other metal surfaces, such as chrome and aluminum.
•This product dispenses as a white, non evaporating foam.
For use On :
Applicable on stainless steel, chrome, architectual aluminum, and other interior metal surface.
Direction Of Use :
Light Soil
1.Shake CAN well before use.
2.Turn spray tip so arrow points to dot on rim. (DO NOT point spray tip to yourself or others)
4. Hold can upright 6-12 inches from surface
5. Spray area lightly directly on surface or on a clean dry cloth.
6. Wipe area and polish until dry
Heavy Soil
1.Spray onto a light duty scrubbing pad or sponge.
2.Vigorously rub the surface to remove the heavy soil. Always rub in the direction of the grain.
4. Wipe surface with a clean, dry cloth to remove excess cleaner.
5. Using a dry cloth, buff in the direction of the grain to achieve the maximum of shine.
Features & Benefits :
•Cleans and polishes surface with no residue
•Leaves no greasy build-up on surfaces
•Leaves a light protective film
•Resists fingerprints, water marks, corrosion and rusting
•Keeps chrome and stainless steel stain and streak free
•Convenient and excellent spray control
Storage & Shelf Life
The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. DO NO store near oxidizing agents or combustible materials. In Countries where high heat and humidity are a factor, special pre-cautions must be taken. Store product in a covered, well ventilated warehouse and avoid excess heat conditions.
Suggested First Aid :
•Eye Contact
•Flush eyes with plenty of water.
•Skin Contact
•Wash the contacted skin with water and soup.
•Swallowed
•DO NOT induce vomiting, drink two glasses water.
•Inhallation
•Move to an open place for fresh air.
•IF IRRITATION PERSISTS, GET IMMEDIATE MEDICAL ATTENTION.
QS 7 Spray Adhesive Multi-Purpose
Applications:
Labeling, bonding, attaching, adhering, fastening, securing, tacking, mounting, sticking, holding and etc.
For Use On :
Cardboard, fabric, felt, foam, foil, glass, label, leather, metal, paper, plaster, plastic, rubber, wood and etc.
Direction For Use :
1.Provide ventilation in workplace.
2.Clean and dry area before applications.
3.If required, mask area that shouldn’t be coated
4.Shake CAN well before use
5.Turn spray tip so arrow points to dot on rim. (DO NOT point spray tip to yourself or others)
Temporary Bonds: Spray to ONE surface with light coated. After 30 seconds, join surfaces together.
Permanent Bonds: Spray to BOTH surfaces, with medium coated.
After 1 to 10 minutes join surfaces to gether.
Clean Up :
Turn can upside down and spray for two seconds to clear valve.
(Prevents clogging up of spray can)
2. If dried in valve opening, remove degreasing solvent or replace actuator tip.
3. To unclog tip or remove overspray, use Adhesive Remover.
Features & Benefits :
•High solids allows for fast tacking and high bonds strength
•Extremely strong, flexible and resists water
•Available for multiple surfaces
•Long bonding range
•Fast and easy application
•Convenient and excellent spray control
Storage And Shelf Life :
The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. DO NO store near oxidizing agents or combustible materials. In Countries where high heat and humidity are a factor, special pre-cautions must be taken. Store product in a covered, well ventilated warehouse and avoid excess heat conditions.
Suggested First Aid :
•Eye Contact
•Flush eyes with plenty of water.
•Skin Contact
•Wash the contacted skin with water and soup.
•Swallowed
•DO NOT induce vomiting, drink two glasses water.
•Inhallation
•Move to an open place for fresh air.
•IF IRRITATION PERSISTS, GET IMMEDIATE MEDICAL ATTENTION.